Government of Canada / Gouvernement du Canada
Symbol of the Government of Canada

Search

Clean Fuel Regulations (SOR/2022-140)

Full Document:  

Regulations are current to 2024-02-06

SCHEDULE 21(Subsection 136(2))Contents of Monitoring Plan

  • 1 A list of other systems of tradeable units in which the participant participates and other third-party audit programs with which they comply.

  • 2 A description of the operations to be verified, including a description of

    • (a) the activities and processes of the operations;

    • (b) the geographical boundaries within which the operations occur; and

    • (c) the technologies, facilities and infrastructure that are used to perform the operations.

  • 3 A simplified block diagram of the operations to be verified, including

    • (a) the feedstock and the fuel, thermal energy or electricity sources that are used in the operations;

    • (b) the intermediate products and final products that the operations produce;

    • (c) the mechanical equipment that is used to perform the operations;

    • (d) the process control instrumentation, including sensors and measurement devices, that are used to monitor the operations;

    • (e) the sampling locations that are used to monitor the operations; and

    • (f) a designation for each element of the block diagram.

  • 4 A description of each source of the data to which the application or report relates that includes, if applicable to the source,

    • (a) its accuracy;

    • (b) its sampling characteristics; and

    • (c) the frequency with which data is collected.

  • 5 A description of the data management system that is used to manage the data to which the application or report relates, including

    • (a) the policies and procedures that ensure data quality, including those that relate to

      • (i) data collection and measurement,

      • (ii) the emission-reduction quantification methods that were used,

      • (iii) reporting,

      • (iv) maintenance, inspection and repair of continuous monitoring systems, flow meters, laboratory equipment and other instrumentation used to collect the data, including procedures for deferring their maintenance and inspection,

      • (v) contingency plans in the event of a failure of a measurement device or a component of a continuous monitoring system,

      • (vi) the keeping of records, including the logbook of measurement device and laboratory equipment repair, calibration and replacement,

      • (vii) the training of key personnel responsible for the data management;

      • (viii) the frequency of sampling,

      • (ix) the laboratory procedures and methods of analysis, and

      • (x) the quality control program that is used by the laboratories;

    • (b) the roles and responsibilities of personnel with respect to the data management system;

    • (c) its design, including the information technology infrastructure and applications used to manage the data;

    • (d) its data management controls, including their location, purpose, frequency and type;

    • (e) the procedures with respect to missing data;

    • (f) the procedures with respect to non-representative data such as data generated during plant shutdowns or emergencies;

    • (g) the subcontractors or the software that are used to manage the data;

    • (h) the security methods that are used to ensure data integrity; and

    • (i) data back-up procedures.

  • 6 The following information with respect to each measurement device that is used to measure data to which the application or report relates:

    • (a) its description;

    • (b) its make, model and serial number;

    • (c) its location, installation method and approximate date of installation;

    • (d) its measurement characteristics, including the units of measure, accuracy and lower detection limits;

    • (e) its maintenance, including the calibration method and calibration frequency;

    • (f) any postponements in calibration and any supporting documents; and

    • (g) the frequency with which it provides measurements.

  • 7 Information with respect to the calculations and use of data to which the application or report relates, including

    • (a) the equations used to

      • (i) calculate flows in mass, volume or energy units of measurement,

      • (ii) convert units,

      • (iii) estimate non-measured parameters,

      • (iv) aggregate data, and

      • (v) estimate, interpolate or extrapolate data;

    • (b) any software used to transform the data; and

    • (c) any statistical methods or techniques applied to transform the data.

  • 8 If the verification is in respect of an application made under section 80 of these Regulations or a report submitted under section 123 of these Regulations, the following information:

    • (a) an explanation of the processes and methods followed to collect the data used in the application or report, including any supporting documents;

    • (b) a description of the steps taken, and calculations made, to aggregate the data;

    • (c) the methodology used to assign volumes, in respect of a fuel, source of electricity or feedstock, for each carbon intensity value; and

    • (d) the methodology used to monitor and calculate the weighted average of the transportion distance, in respect of a fuel, source of electricity or feedstock, for each transport mode, including any supporting documents.

  • 9 An explanation of the process and methodology that was used to calculate the maximum quantity of a low-carbon-intensity fuel in accordance with subsection 45(1), including any supporting documents and data.

  • 10 If the verification is in respect of a credit-creation report submitted under section 120 of these Regulations, a credit-adjustment report submitted under section 122 of these Regulations or a compliance report submitted under section 127 of these Regulations, a reference to the documents that relate to the quantity of any fuel or energy source that was produced and the sale, purchase or transport of any fuel or energy source.

 

Date modified: